Thursday, January 28, 2016

Cancer, Candida, Yeast and Fungus The Cure Baking Soda!

How candida may possibly be connected to cancer.

Dr. Tullio Simoncini, a strong advocate of the fungal theory in relation to cancer.

Candida Albicans is a fungal yeast.
It is present naturally in the human gut; everyone has Candida Albicans living within them to some extent.
Our gut is also full of natural bacteria that feed on the yeast and keep levels to a low number to stop it from becoming a problem.
The yeast becomes problematic when it grows beyond normal levels and spreads throughout the gastrointestinal tract, into the bloodstream and from there throughout the body.
Once it's loose in your blood-stream, the yeast then does something remarkable and changes into fungus...

Once The Yeast Escapes Your Gut,
Like 'Alien', It's Loose in the 'mothership'

This fungus now settles itself into your tissue and a fungal colony quickly spreads.
The fungus wreaks havoc on your body, and excretes(poops) over 300 different mycotoxins into your blood stream as a result of its own digestive processes.
The fungus is protected as it has now left your gut and does not face the challenge of your gut bacteria trying to eat it.
Normally, before this gets out of hand, your immune system would identify and fight off this 'alien' intruder without a sweat.
Sadly, more and more people suffer from low immune systems due to stress, bad diet, or general ill health.
This means the immune system is not as strong as it needs to be to fight the Candida fungus.
However, that's not the real problem with Candida The real problem is the 'armour' of the fungus...
Candida alien
Once Candida Yeast escapes your gut, it's loose in your blood-stream, it seems like it has a mind of it's own, like alien, it's loose in the mothership. It begins to form Candida Fungus, which is protected by a powerful armor called a "chitin layer" similar to insects with exo-skeletons.

The Fungus Is Protected by an Armour-Like Cellular Membrane, Impossible for Your Immune System to Penetrate...

The Candida fungus is protected from your immune system's attack by its cellular membrane.
It's called: Chitin, or Chitin layer.
Imagine the fungus is wearing a suit of armour that your immune system cannot punch through if it's weak.
This is why Candida is so hard to get rid of!
There's plenty of expensive Candida treatments and even strict Candida diets that claim to get rid of Candida
...however all they do is simply put the fungal growth under control...
Candida Fungus Colony Candida fungus under microscope. Candida forms stringy mycelium like connections... it almost looks like it has it's own nervous system,
The fungus can stay dormant in your body for years, and the moment you slip up with your diet even just for a single day, or maybe you just have a stressful week and your immune system takes a dip...

...then, the fungus explodes in growth, and your systemic Candida problem continues, and what's more...

Retrieved from url

Cancer is Not a Cell It's a Fungus (Candida), Preventive care is Deathcare in Sheep's Clothing

Dr Burzynski: The Cancer Treatment They Don't Want You to Know About‏

Natural Cures "They" Don't Want You to Know About

Wednesday, January 27, 2016

Fighting Cancer 2.0: Scientists Destroy Cancer Cells With Resonant Frequencies

 A new cancer treatment is using resonant frequencies to shatter various types of cancer cells.

 In his Tedx Talk, “Shattering Cancer with Resonant Frequencies,” Associate Professor and Director of Music at Skidmore College, Anthony Holland, tells the audience that he has a dream.

 That dream is to see a future where children no longer have to suffer from the effects of toxic cancer drugs or radiation treatment, and today he and his team believe they have found the answer.

 Many of us have likely seen or heard of people shattering glass with the sound of their voice. This amazing feat, Holland explains, is due to a phenomenon called resonant frequency. 
When someone taps a glass, it emits a natural resonant frequency.

 To induce shattering, a person must match the resonant frequency of the glass with the vibration of their voice, getting louder and louder until the glass finally breaks. 

 Taking this phenomenon into account, Holland and a team of researchers wondered if they could induce the same effect in a living microorganism or cell. 
Cancer Cells Holland Frequency
They came across the work of a Chinese researcher, Dr. Mae-Wan Ho, who conjectured that live cells exhibit similar properties much like liquid crystals do. With this in mind, Holland and his team wondered if they could affect a cell by sending a specific electric signal, much like we do with LCD technology. After searching the patent database for a device that could accomplish the latter, they came across a therapeutic device invented by a New Mexico physician by the name of Dr. James Bare.

The device uses a plasma antenna that pulses on and off, which, as Holland explains, is important because a constant pulse of electricity would produce too much heat and therefore destroy the cell. 

For the next 15 months, Holland and his team searched for the exact frequency that would directly shatter a living microorganism. The magic number finally came in the form of two inputs, one high frequency and one low. The high frequency had to be exactly eleven times higher than the low,

 which in music is known as the 11th harmonic. At this 11th harmonic, micro organisms begin to shatter like crystal glass. After practicing until they got efficient at the procedure, Holland began working with a team of cancer researchers in an attempt to destroy targeted cancer cells. First they looked at pancreatic cancer cells, eventually discovering these cells were specifically vulnerable between 100,000 – 300,000 Hz. 

Next they moved onto leukemia cells, and were able to shatter the leukemia cells before they could divide. But, as Holland explains in his talk, he needed bigger stats in order to make the treatment a viable option for cancer patients. So what kind of numbers did they produce? In repeated and controlled experiments, the frequencies, known as oscillating pulsed electric field (OPEF) technology, killed an average of 25% to 40% of leukemia cells, going as high as 60% in some cases. 

Furthermore, the intervention even slowed cancer cell growth rates up to 65%. It was a double whammy. The team also found success attacking ovarian cancer cells. Most recently, they tested the treatment against the deadly super bug MRSA, an organism that is resistant to many common antibiotics. Thousands of people die every year from MRSA, Holland explains, and the drugs normally used against the pathogen are known to have toxic side effects. Incredibly, the frequency therapy eliminated antibiotic resistance, and researchers were able to introduce a small amount of antibiotic to kill the bug. 
Fighting Cancer 2.0: Scientists Destroy Cancer Cells With Resonant Frequencies
Holland hopes that one day the treatment will override the toxic conventional treatments currently available for patients. At the end of his speech, he describes his vision for the future of cancer clinics: It’s also noteworthy to mention that in 1920 that Royal Rife first identified the human cancer virus using the world’s most powerful microscope. After identifying and isolating the virus, he decided to culture it on salted pork. At the time this was a very good method for culturing a virus. 

He then took the culture and injected it into 400 rats which as you might expect, created cancer in all 400 rats very quickly. The next step for Rife is where things took an interesting turn. He later found a frequency of electromagnetic energy that would cause the cancer virus to diminish completely when entered into the energy field ( via ). 


Monday, January 25, 2016

Hollow Earth, The Biggest Cover Up - Full Documentary

Kenyan Bishops Discover Mass Sterilization in Bill Gates Vaccines

Russia Threatens Obama to Reveal Alien Presence or They Will


UFO attacks the Columbia

Published on Mar 31, 2013
what really happened at Columbia before returning to earth?
What do you think?


Published on Nov 21, 2012
A closer look at a massive November UFO fleet. A camera was set up to record the moon for hours on many nights. Nothing came of it until recently (November 20th 2012) when this was caught on tape. Now I know most the moon UFO sightings that are taped are probably real. Watch this authentic massive UFO fleet fly away from the moon in 1080p HD for best results

Wednesday, January 20, 2016

How to Point a Satellite Dish

What you need to know: A Quick Overview

1) Azimuth refers to the horizontal measurement of a direction. In terms of your satellite dish, it tells you how far left or right your dish should point.

2) Your elevation gives your satellite dish its heading, or how far above the horizon it needs to point (up and down).

3) Polarization also known as "skew", refers to the adjustment needed for the curvature of the Earth. This rotational adjustment compensates for the Earth’s curvature between the dish and the beam of the satellite.

With your azimuth and elevation numbers in hand, get a compass. Standing close to your  satellite dish, rotate your compass until the needle points North, or zero degrees. Starting from this point, locate the azimuth number on the compass and turn to face that point without moving the compass itself. East is 90 degrees, South is 180 degrees and West is 270 degrees. If your azimuth number is 240 for example, you would face a direction between South and West on your compass.

You can use this tool to determine where to point your dish>> SATELLITE FINDER

The above link will take you to a site where you enter the satellite (Galaxy 19, 97ow) and then your location. A satellite picture of your location will appear (takes a little time) with a pointer symbol and a line, move this pointer to the exact (as close as you can come) place you are installing your dish and use the landmarks the line passes through to determine where to point your dish.

If you do not have internet access at your location we suggest you use this link >>  << at a location (library, etc) that does have internet access and print out the map so you have a reference sheet as to where your dish is to be pointed.

Now that you’ve found your direction (left/right), estimate the angle of elevation (up/down). With the ground representing zero, calculate the distance going upwards using the elevation number. Straight up would be 90 degrees, so if your elevation number was 45, your elevation would be halfway between the ground and looking straight up into the sky.

It is important to note, your dish antenna must be installed correctly before you can attempt to align your dish to the correct satellite to receive satellite transmissions.
Pointing your satellite dish antenna to the correct spot in the sky to receive satellite signals is a task which can be accomplished by anyone with the knowledge and desire to do so. However, depending on your particular setup, you may need some additional help.

Aligning a satellite antenna (dish) to a broadcast satellite for the purpose of receiving a signal.

We live in a three dimensional world. You can think of the three dimensions as height, width and depth.
For purposes of aligning your dish antenna, we will call height, elevation and we will call width, azimuth. Azimuth is just a fancy word for direction. The depth would be the distance from your dish to the satellite or about 23,748 miles. To receive your satellite TV signal from the correct satellite you must point your dish to a specific spot in the sky which will give you the best possible signal strength. This spot is the location of your satellite in space. The question is, how do you determine exactly where to point your dish?

1.            Elevation - Angle between the Earth and the satellite, above the horizon. This is also referred to as the up or down movement (position) of the satellite antenna (dish). Elevation is measured in degrees. Elevation is the upward tilt of a satellite antenna, measured in degrees, required to aim the antenna at the satellite. Think of elevation as follows: If you stand straight up and look out to where the land meets the sky (horizon) hold your arm straight out and point to the horizon, this is zero degrees elevation. Start moving your arm up slowly and point to the sky. You are now elevating up in degrees. When you get to where your arm is straight up pointing to the sky right above your head, this is 90 degrees. What you'll be looking for when pointing your dish is an angle somewhere in between zero and 90, most likely 30 (northern states) to 55 (southern states).
2.            Azimuth - Compass direction the antenna is pointed towards, relative to a magnetic north. This is also referred to as the left or right movement (position) of the satellite antenna. The angle of rotation (horizontal) that a dish antenna must be rotated through to point to a specific satellite in orbit. The angle is a north to south line through the antenna’s location, measured in degrees clockwise.

3.            Polarization - Correction between where the antenna is relative to the curvature of the Earth and the satellite’s signal beam. The satellite signal is either Horizontal or Vertical polarized, but due to the longitude of the antenna location, the antenna’s feed horn must be rotated to correctly match the beam's polarization.

Determining the Elevation and Azimuth

The satellite appears to be fixed in space approximately 23,748 miles above the equator. In reality, the satellites travel from west to east, but to us on Earth they appear stationary because they match the exact speed of the Earth's rotation. (This is a geostationary orbit.) If you stand up now, turn towards the southern sky, and tilt your head up to the heavens, you'll be looking in the general direction of the DBS satellites.

To aim your satellite dish antenna at the satellite, you need to know your azimuth and elevation coordinates. Azimuth is defined as the horizontal direction expressed as the angular distance between the direction of your dish and the direction of the DBS satellites. More simply, azimuth relates to the left-to-right positioning of your dish. Elevation is the angular distance of the satellite above the horizon in relation to your dish. In other words, elevation concerns the up-and-down positioning of your dish.Further explanation: A geo-stationary satellite in orbit around the Earth remains above the same location on Earth since it's orbit is in synch with the Earth's rotation. The satellite transmits it's signal to Earth after receiving it from an Earth ground station. Your dish antenna captures the signal and focuses it on the LNB which feeds it down a cable to your receiver which decodes it and sends it to your television. The dish antenna has to be aligned properly so that it can capture the signal. It has to be pointed towards the signal and fine tuned for maximum signal strength.

For each location on the Earth's surface which can capture a particular satellite signal, you have to align the dish at different angles to receive the best signal. Everyone in the Northern hemisphere of the Earth (includes the United States) has to point their dish towards the southern sky since the satellite you require is positioned over the equator. A dish in North Dakota has to be pointed lower than a dish in Texas. A dish in Florida has to be pointed differently than a dish in California.
You can use this tool to determine where to point your dish>> SATELLITE FINDER


Now that you have your azimuth and elevation coordinates, what do you do with them?

Set up your dish antenna to ensure an unobstructed line of sight to the satellites. To receive satellite broadcast signals, your dish needs to be positioned correctly. Mount your dish so that the base fits flush with the mounting surface (level if mounted on a flat beam or roof, or on an angle to match the pitch of your roofline). When you have securely mounted your dish, adjust it so the dish mast is plumb, that is, exactly perpendicular to level — this is best achieved using a carpenter's bubble level. With your dish now mounted and properly set, you are ready to aim your dish toward the proper satellites.

To set the dish to point up to the satellite, you'll first need to set the elevation. Then you'll point the dish in the proper left-to-right position to set the azimuth.

For anyone in the U.S., begin by pointing your dish to the South. If you do not know where South is you can use a general purpose compass to determine North and South.

Setting the Elevation (UP), (DOWN)

You can set the proper elevation after the dish is securely mounted. First, loosen the nuts securing the two elevation bolts so that the dish easily moves up and down. Line up the elevation indicator with the tick mark corresponding to your elevation number. Then tighten the bolts.

Setting the Azimuth (LEFT), (RIGHT)

Loosen the azimuth nuts on the LNB arm enough that the dish can be turned smoothly with little pressure. Set the azimuth by moving the dish left and right. Point the dish in the general direction of the satellite, in the southern sky. By using a compass you can better pinpoint the direction with your azimuth number to correspond with the degrees on your compass.
Acquiring the Signal

Now your dish will be in position to lock in on the satellite signal. You'll need to

1) have your satellite receiver connected to your television, with both turned on, and
2) have your antenna to receiver cables connected, and
3) be viewing your Setup Antenna/Signal Strength display from your on-screen menu to measure the signal strength accurately.

Ask someone to watch the Signal Strength screen for indications you are receiving the signal. Stand behind the dish, and holding its outer edges, slowly turn it a little to the right to adjust the azimuth. Pause a few seconds, giving the receiver enough time to lock in on the satellite signal. Continue turning the dish in this way until you have acquired the signal or until you have rotated the dish approximately 15 degrees from the starting point.

If you haven't detected a signal yet, return to the starting point and move the dish to the left again. If you don't acquire the signal after rotating the dish approximately 15 degrees to either side of the calculated azimuth angle, loosen the elevation bolts and tilt the dish upward so the elevation indicator moves halfway from the current tick mark to the next mark. Then tighten the elevation bolts. Repeat the azimuth adjustments again to lock in on the signal.If the signal still eludes you, check:
•             that nothing — a tree, for example — obstructs the signal
•             that the cables are connected properly to the receiver
•             that you have the correct azimuth and elevation coordinates
Fine Tuning

When you have received the satellite signal, it is important to fine-tune the dish pointing to make sure you have the maximum possible signal strength. Maximizing the signal is important in that it reduces "rain fade" during inclement weather. Loosen the elevation bolts, then gently continue turning the dish a little in the same direction you were turning it when you began to receive the satellite signal. Pause for a few seconds each time after moving the dish. Turn the dish in this way until the signal strength reaches its highest reading and then begins to fall. Then slowly turn the dish the opposite way until you again receive the highest reading on the Signal Strength screen. 
Important: The Signal Strength reading does not need to be "100." Lock in on the highest possible signal which is usually 70 to 85.

Tighten the azimuth bolts. Loosen the elevation bolts. Slowly tilt the dish up and down to improve the Signal Strength reading. When you are satisfied that you have the strongest signal, tighten the elevation bolts.

Another website to look at for azimuth & elevation calculation: 

You may need to adjust your azimuth angle to account for magnetic declination.



Tuesday, January 19, 2016

ili (Wearable Translator) by Logbar

What is ili?

ili is the world's first wearable translator for travelers. Say goodbye to all language barriers.

Instant translation

ili contains an OS of its own, which allows it to translate words instantly. Currently supports English, Chinese, and Japanese.

No need for the internet

ili works without Wi-Fi, 3G, or any other internet connection. You can use ili anytime, anywhere.

Loud and clear

ili’s powerful speaker clearly projects your translated message above the background noise.

Proprietary dictionary

ili includes a library of travel lexicon. For travel purposes, ili outperforms all existing translation engines.

Monday, January 18, 2016

Take the Jung Typology Test™

Jung Typology Test™

This free test is based on Carl Jung’s and Isabel Briggs Myers’ typological approach to personality.
Upon completion of the questionnaire, you will:
  • Obtain your 4-letter type formula according to Carl Jung’s and Isabel Briggs Myers’ typology, along with the strengths of preferences and the description of your personality type
  • Discover careers and occupations most suitable for your personality type along with examples of educational institutions where you can get a relevant degree or training
  • Understand communication and learning styles of your type.
  • See which famous personalities share your type
  • Be able to use the results of this test as an input into the Jung Marriage Test™ and the Demo of the Marriage Test™, to assess your compatibility with your long-term romantic partner
Instructions: When responding to the statements, please choose the response you agree with most. If you are not sure how to answer, make your choice based on your most typical response or feeling in the given situation. To get a reliable result, please respond to all questions. When you are done with answering, press the “Score It!” button at the bottom of the screen.

DIRECTV Error Code 721

This error might be caused by one of the following situations:
  • The channel you're trying to watch is not included in your programming package.
  • Your receiver is not processing the programming information on this channel.
To resolve the issue yourself, follow the steps below or watch the video.

Solution 1: Check your channel lineup


On the My Overview page, click Print Channel Lineup.


If the channel you're trying to watch is not included in your programming package, click Change Package to easily upgrade your package.
Still seeing Error Code 721 on your TV screen?

Try Solution 2.

Solution 2: Refresh your service


Many issues, such as missing channels, can be fixed by “refreshing” your receiver. Please visit the My Equipment page and then select the “Refresh Receiver” link next to the receiver you’re having trouble with.
Still seeing Error Code 721 on your TV screen?

Try Solution 3.
Solution 3: Reset your receiver


Unplug your receiver's power cord from the electrical outlet, wait for 15 seconds, and plug it back in.


Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.


Go to My Equipment to refresh your receiver again.
Still seeing Error Code 721 on your TV screen?

Please call 1-800-531-5000 for assistance.

Best online tool for foreign student

For people that struggle with and foreign idiom,the following tools are best in class to have it handy for any chance need it at school

1- Grammar check

About the spelling and grammar checker

This tool enables you to correct the most cumbersome mistakes, with a high degree of accuracy and speed, and to improve your written English.
When several corrections are possible, you are prompted to choose one of them. There are cases when mistakes are skipped in order to limit the display of warnings or when the suggested corrections are not perfectly adapted to the context. Therefore, we advise you not to rely exclusively on the results delivered by our tool and to review the text yourself after the correction. To improve your English spelling, you can also consult our online grammar module and our conjugator.
Do not hesitate to send us your feedback on the results of the spelling and grammar check. This way, you will enable us to improve our service.
Contact us if you want to implement a spell-checking tool adapted to your company (for French, English or other languages). If you are looking for a PC product, we recommend Ginger.
The concept of an automatic and interactive online spell-checker was created and developed by Reverso-Softissimo in addition to the online translation service. It makes use of the best technologies developed by Ginger Software with an interface, settings and complementary processings specifically devised by Reverso-Softissimo for the Reverso website and the Reverso Intranet products.

2- Paraphrasing Tool

Use Paraphrasing Tool to paraphrase or rewrite full length essays and articles or to find new ways to express simple phrases, sentences or single words. Whether your goal is to remix textual content for a website, term paper, business document, email or tweet, Paraphrasing Tool will do the trick. Applications which stand to benefit from text rewritten by Paraphrasing Tool range from expanding blog and website footprint on the web with quality content to facilitating brainstorming for any essay or creative writing project.

3-Online Translator

Wednesday, January 13, 2016

Trump vs. Obama: Smackdown over State of the Union

Trump vs. Obama: Smackdown over State of the Union
The Fiscal Times 
“People occupy different realities on guns,” President Obama said recently at a town hall meeting. Yes, and people -- like Donald Trump -- also occupy different realities when it comes to the state of the union.
While Obama hails the recovery he has led, Trump claims the economy is a “disaster.” Where Obama sees progress on reining in Iran’s nuclear ambitions, Trump sees the “worst deal ever negotiated in my lifetime.” As the president takes credit for leading the fight against climate change, Trump calls Obama’s claim that global warming is our biggest threat “one of the dumbest statements I've ever heard in politics -- in the history of politics as I know it.” 
Donald Trump has built his campaign challenging Obama’s realities, with understandable success. He is saying what many Americans think – that President Obama’s priorities and policies are wrong, and even dangerous. Obama claims that the ­Trans-Pacific Partnership (TPP), the largest free-trade agreement concluded since NAFTA in 1993, would expand our exports and give “our workers the fair shot at [the] success they deserve.”
Donald Trump tweeted, “The incompetence of our current administration is beyond comprehension. TPP is a terrible deal.” A just-published World Bank study shows that of the 12 nations involved, the U.S. gains the least from the deal, boosting our economy by only 0.4 percent by 2030, compared to 10 percent for Vietnam. Whose view is closer to the truth?
The president celebrates Obamacare, and the increased number of people who have health insurance. But 33 million Americans still don’t have insurance and those who do are unhappy with their limited choice of doctors and high deductibles. Trump, who believes in universal coverage, calls the president’s signature healthcare plan a “complete disaster” which should be repealed and replaced. He cites fast-rising premium costs and proposes a private market solution. The majority of the country agrees.
Obama hails reductions in our troops stationed in Afghanistan and Iraq but increased violence in those countries mean that our soldiers are being deployed again. Meanwhile, Russia annexed Crimea and the U.S. stood by, desperately wanting Moscow to resolve the conflict in Syria. China has now placed military bases in the South China Sea and perpetrated enormous cyberattacks on the U.S. The Obama White House has not responded for fear that Beijing might torpedo the Paris climate accord. Iran has tested ballistic missiles in defiance of U.N. resolutions and fired rockets near a U.S. aircraft carrier, while Obama looked the other way to preserve the nuclear deal.
Trump tweets: “We need much tougher, much smarter leadership - and we need it NOW!” The country, which gives Obama low marks for his handling of terror threats and foreign policy, would seem to agree.
President Obama has belittled the threat of Islamic terror, despite its obvious spread. The president calls for an influx of refugees from war-torn lands who by definition cannot be vetted and who may pose real threats to our citizens. Donald Trump has called for a moratorium on Muslim immigrants “until our country’s representatives can figure out what’s going on” – attracting an avalanche of criticism. Lo and behold, 53 percent of the country agrees with him.
Trump’s criticisms tend to stick because they have substance. He says the 5 percent unemployment rate is bogus because there are so many who have dropped out of the workforce. He’s right: there are 94 million adults on the sidelines. He says the new jobs added are not high quality. It’s true that wages are stagnant. He says we haven’t been adding enough jobs. Economist William Dunkelberg of the National Federation of Independent Businesses notes, “The 1983-90 expansion created 689,000 jobs per quarter compared to 439,000 in this expansion…all that with a 30 percent smaller labor force….” Meanwhile, we see nearly 47 million receiving food stamps and an alarming decline in new business formations. Even Vice President Joe Biden agrees the middle class has been left behind.
The billionaire builder is not the only one trumpeting our economic problems. The stock market has been weighing in as well, suffering the worst opening-week ever. Why? Because investors are worried about the Fed hiking interest rates. They see our manufacturers struggling against the resulting stronger dollar, while other sectors – like energy – are engaged in a fight-to-the death with slumping prices and ramped-up government regulations. They see the number of businesses going under outpacing start-ups for the first time in 35 years and a demoralizing dearth of new investment.  
There are other issues at work, such as China’s slowing growth rate. But the U.S. can overcome declining growth overseas as long as consumers and businesses in the U.S. have the confidence to spend and invest. Unfortunately, some of the key players in our economy – like small business owners – are not optimistic. Hiring by that group has been tepid due to concerns about Obamacare, new overtime pay rules and other regulations.
Obama sees a bright future for the United States, if we continue down his path. But 65 percent of Americans think we are headed in the wrong direction. Many see our country reeling from seven years of wrong-headed mismanagement, increasingly costly regulations, and policies driven by political correctness instead of common sense. Those folks share Donald Trump’s perspective on the state of the union. And, they want him to make our country great again.