Thursday, July 28, 2016
Hillary Clinton: U.S. should take 65,000 Syrian refugees. But what happen then? USA will be destroyed
Hillary Clinton: U.S. should take 65,000 Syrian refugees
Last Updated Sep 20, 2015 12:40 PM EDT
Democratic presidential candidate Hillary Clinton said Sunday that the United States should accept 65,000 refugees from Syria to help alleviate the humanitarian crisis created by the war there."We're facing the worst refugee crisis since the end of World War II and I think the United States has to do more," the former secretary of state said Sunday on CBS' "Face the Nation." "I would like to see us move from what is a good start with 10,000 to 65,000 and begin immediately to put into place the mechanisms for vetting the people that we would take in."
She said there should be a focus on admitting the most vulnerable, like persecuted religious minorities, or those who had been brutalized, like the Yazidi women.
Clinton also said, "I want the United States to lead the world," and said the United Nations Secretary General should call for a meeting at the upcoming U.N. General Assembly meeting in which countries make specific commitments about to provide money and aid.
Former Maryland Gov. Martin O'Malley, one of Clinton's challengers for the Democratic nomination, said earlier this month that the U.S. should accept 65,000 refugees.
The mass exodus of civilians from Syria has created a humanitarian crisis as hundreds of thousands of refugees attempt to enter Europe. Some countries have begun tightening their borders in an attempt to stem the flow of people.
White House Press Secretary Joshua Earnest said earlier this month that President Obama had directed his administration to begin preparing to admit at least 10,000 refugees. That would be a significant increase from the 1,500 it is on track to accept by the end of September, but still far less than the target number Clinton has proposed.
The former secretary of state was an early proponent of arming moderate rebels inside Syria at the beginning of the conflict in order to fight the regime of Syrian dictator Bashar al-Assad, but the administration did not begin a train and equip program until after she left her post as secretary of state, but has been plagued by problems. A top U.S. commander in the Middle East admitted last week that only four or five moderate Syrian fighters the U.S. trained still remained on the battlefield.
"Where we are today is not where we were. And where we are today is that we have a failed program," Clinton said. But she added later, "I wouldn't give up on train and equip, but I sure would push the Pentagon to take a hard look at why what has been done has been such a failure and what more we can do to support Kurdish fighters who are on the front line."
During the interview, moderator John Dickerson replayed Clinton's famous ad from the 2008 campaign that suggested she was best prepared to handle a crisis at 3 a.m. He asked if the attack on the U.S. diplomatic facility in Benghazi was the test she alluded to and asked her to evaluate how she handled it by the standard she laid out in 2008.
"It was terribly tragic what happened. I immediately asked for an independent review, just like former secretaries of state did. And I made that public," she said. "My view on this is we have to learn things. And we're always learning. We learned about Beirut, we learned after Tanzania and Kenya; we have learned after Benghazi. But we're not going to be able to represent the United States working out of hermetically-sealed tanks, we're going to have to be out in the world."
Clinton said she "never felt any political pressure" to spin the story as more favorable to the administration, one of the critiques that was leveled by opponents when then-U.N. Ambassador Susan Rice blamed the attack on an anti-Islamic video.
"I and other said that we were attacked, there was no doubt about that. That video, which was still spinning through the world, was being mentioned on social media. We had people climbing the walls of our embassy in Cairo even before the attack in Benghazi and we had a lot of other attacks," she said. "I mean, I had to call the president of one of our neighboring countries, Tunis, to get them to help protect our embassy."
A congressional committee investigation into the attacks later led to revelations that Clinton had used a private email server during her time as secretary of state. She maintains that everything she did was legal and allowed by the government, but apologized earlier this month and said it was a "mistake" to use a private email address.
"I'm sorry that I made a choice that has raised all of these questions because I don't like reading that people have questions about what I did and how I did it," Clinton said on "Face the Nation." "I'm proud of the work we did at the State Department and I'm really proud of all the career professionals I worked with, I'm proud of the people who came in with me."
She also said she is being "as transparent as possible" about follow up questions about the server.
Face The Nation
http://www.cbsnews.com/news/hillary-clinton-u-s-should-take-65000-syrian-refugees/
Tuesday, July 26, 2016
How to Re-Peak a DIRECTV Satellite Dish for Better Signal
The most effective method to Re-Peak a DIRECTV Satellite Dish for Better Signal
Redesigned on June 5, 2013
DIRECTV satellite dish.
DIRECTV satellite dish.
In the event that you are encountering next to zero satellite show signal, you may need to re-top (or re-point) your satellite dish to get or calibrate the telecast signal. On the off chance that you like to settle the issue yourself instead of getting out a specialist, the accompanying guidelines guide you through the accompanying strides: (1) re-setting your DIRECTV collector; (2) re-topping your satellite dish; and (3) re-securing your satellite dish.
Note: Before re-topping your satellite dish, read the Safety Instructions that came in your DIRECTV collector box or accessible at DIRECTV's site.
Hardware and Tools
You will require the accompanying hardware and apparatuses to re-crest your dish:
Stepping stool of suitable tallness to achieve your satellite dish
7/16-inch or 1/2-inch sickle wrench contingent upon size of satellite dish
7-inch attractive air pocket level
Compass
DIRECTV collector
TV
Cautioning: Follow legitimate stepping stool wellbeing precautionary measures when utilizing your step. Inability to do as such could bring about real harm.
Re-Setting Your Receiver
On the off chance that you are seeing the Searching for Satellite message on your TV screen, separate the force line from your DIRECTV beneficiary for 30 seconds. In the wake of holding up 30 seconds, reconnect the force line to your DIRECTV recipient. In the event that the hunting down satellite message comes back to your screen, you should re-crest your satellite dish by altering the azimuth and rise settings.
Settings and Help menu
Settings and Help menu
Satellite Dish Setup menu
Satellite Dish Setup menu
Signal Strength screen
Signal Strength screen
Test Signal Strength screen
Test Signal Strength screen
Re-cresting Your Satellite Dish
Before re-cresting your satellite dish, get to the Signal Meters menu from the Settings and Help menu on your beneficiary to utilize the sign meter to screen the telecast sign to your satellite dish. To get to the Signal Meters menu:
Press the menu catch on your remote.
Select Settings and Help on the left hand menu.
Select Settings.
Select Satellite on the left hand menu.
Select View Signal Strength on the base right-hand screen (look to it utilizing the bolts on your remote).
Select Signal Meters on the base right-hand screen.
Re-position your TV to be in your observable pathway while re-topping your satellite dish. On the off chance that conceivable, have a companion screen the sign meter and transfer the telecast signal quality to you while you are re-cresting your satellite dish.
To re-crest your dish you should play out these assignments:
Watch that the pole is level.
Conform the azimuth of the satellite dish.
Conform the height of the satellite dish.
Cautioning: Use alert while conforming the pole. The heaviness of the satellite dish may bring about the pole to swing down and hit you, an observer, or adjacent items. This could bring about real harm or harm to adjacent articles and the satellite dish. Continuously hold the pole around its outside perimeter to avert damage to your fingers.
The bolster sleeve nuts are situated on the back of your satellite dish.
The bolster sleeve nuts are situated on the back of your satellite dish.
Watch that the pole is level. On the off chance that the show signal quality is lost in view of solid wind or other severe climate, the pole supporting your satellite dish may never again be level. On the off chance that the pole has not moved, you can skip to the following stride, Adjust the azimuth of your satellite dish. To check if the pole is level:
Position your step as important to achieve your satellite dish.
Cautioning: Ensure your step is situated on a steady and level surface to anticipate falling and real damage.
Utilize your 7/16-inch (or 1/2-inch wrench, contingent upon the span of your satellite dish) to unscrew the bolster sleeve nuts on the back of your satellite dish.
Expel your satellite dish and tenderly place it on the ground or other secure area.
Place your 7-inch attractive air pocket level on the pole to confirm that it is opposite (or 90 degrees) to the ground.
Re-level the pole as important to re-position it to be opposite to the ground.
Place your satellite dish painstakingly back onto the pole and re-fix the bolster sleeve nuts so that your satellite dish is secure, yet versatile.
When you have put your satellite dish back on the pole, you can change the azimuth.
Alter the azimuth of your satellite dish. The azimuth alludes to the revolution of the entire satellite dish around a vertical pivot (the pole). It is the flat (side-to-side) edge. To conform the azimuth of your satellite dish:
Utilize your compass to figure out which course is west.
Turn your satellite dish gradually from the west towards the east, while observing the show signal level on the sign meter of the Dish Pointing menu.
Turn your satellite dish towards the east once you see the show signal begin to increment. At the point when the show signal begins to diminish once more, pivot your satellite dish back towards the west until the sign meter has achieved the most elevated sign level.
Fix the bolster sleeve nuts totally and guarantee your satellite dish can no more move.
In the event that the show signal quality is still not to sought level, you can likewise alter the rise of your satellite dish. The height of your satellite dish ought to just need conformity if the rise jolts have come free.
The height jolts are on either side of the back of your satellite dish.
The height jolts are on either side of the back of your satellite dish.
Alter the rise of your satellite dish. The rise alludes to the edge between the satellite dish guiding heading, specifically towards the satellite, and the nearby even plane. It is the vertical (up-down) point. To alter the rise of your satellite dish:
Relax the height jolts on either side of the back of your satellite dish, while supporting your satellite dish, with the goal that it is still versatile.
Lift your satellite dish vertically, while observing the show signal on the sign meter on the Dish Pointing menu. On the off chance that the sign level begins to reduction, bring down your satellite dish until the sign meter has achieved the most astounding sign level.
Once the sign meter has achieved the most noteworthy sign quality, quit lifting your satellite dish.
Fix the rise jolts totally and guarantee your satellite dish can no more move.
When you have fixed the rises jolts, you can re-secure your satellite dish.
Re-Securing Your Satellite Dish
After you have balanced the azimuth and balanced the rise, affirm all bolster sleeve nuts and height fasteners are fixed. Affirm on the sign meter of the Dish Pointing menu that the show signal quality is at its most abnormal amount.
https://turbofuture.com/home-theater-audio/How-to-Re-Peak-a-DIRECTV-Satelite-Dish-for-Better-Signal
Redesigned on June 5, 2013
DIRECTV satellite dish.
DIRECTV satellite dish.
In the event that you are encountering next to zero satellite show signal, you may need to re-top (or re-point) your satellite dish to get or calibrate the telecast signal. On the off chance that you like to settle the issue yourself instead of getting out a specialist, the accompanying guidelines guide you through the accompanying strides: (1) re-setting your DIRECTV collector; (2) re-topping your satellite dish; and (3) re-securing your satellite dish.
Note: Before re-topping your satellite dish, read the Safety Instructions that came in your DIRECTV collector box or accessible at DIRECTV's site.
Hardware and Tools
You will require the accompanying hardware and apparatuses to re-crest your dish:
Stepping stool of suitable tallness to achieve your satellite dish
7/16-inch or 1/2-inch sickle wrench contingent upon size of satellite dish
7-inch attractive air pocket level
Compass
DIRECTV collector
TV
Cautioning: Follow legitimate stepping stool wellbeing precautionary measures when utilizing your step. Inability to do as such could bring about real harm.
Re-Setting Your Receiver
On the off chance that you are seeing the Searching for Satellite message on your TV screen, separate the force line from your DIRECTV beneficiary for 30 seconds. In the wake of holding up 30 seconds, reconnect the force line to your DIRECTV recipient. In the event that the hunting down satellite message comes back to your screen, you should re-crest your satellite dish by altering the azimuth and rise settings.
Settings and Help menu
Settings and Help menu
Satellite Dish Setup menu
Satellite Dish Setup menu
Signal Strength screen
Signal Strength screen
Test Signal Strength screen
Test Signal Strength screen
Re-cresting Your Satellite Dish
Before re-cresting your satellite dish, get to the Signal Meters menu from the Settings and Help menu on your beneficiary to utilize the sign meter to screen the telecast sign to your satellite dish. To get to the Signal Meters menu:
Press the menu catch on your remote.
Select Settings and Help on the left hand menu.
Select Settings.
Select Satellite on the left hand menu.
Select View Signal Strength on the base right-hand screen (look to it utilizing the bolts on your remote).
Select Signal Meters on the base right-hand screen.
Re-position your TV to be in your observable pathway while re-topping your satellite dish. On the off chance that conceivable, have a companion screen the sign meter and transfer the telecast signal quality to you while you are re-cresting your satellite dish.
To re-crest your dish you should play out these assignments:
Watch that the pole is level.
Conform the azimuth of the satellite dish.
Conform the height of the satellite dish.
Cautioning: Use alert while conforming the pole. The heaviness of the satellite dish may bring about the pole to swing down and hit you, an observer, or adjacent items. This could bring about real harm or harm to adjacent articles and the satellite dish. Continuously hold the pole around its outside perimeter to avert damage to your fingers.
The bolster sleeve nuts are situated on the back of your satellite dish.
The bolster sleeve nuts are situated on the back of your satellite dish.
Watch that the pole is level. On the off chance that the show signal quality is lost in view of solid wind or other severe climate, the pole supporting your satellite dish may never again be level. On the off chance that the pole has not moved, you can skip to the following stride, Adjust the azimuth of your satellite dish. To check if the pole is level:
Position your step as important to achieve your satellite dish.
Cautioning: Ensure your step is situated on a steady and level surface to anticipate falling and real damage.
Utilize your 7/16-inch (or 1/2-inch wrench, contingent upon the span of your satellite dish) to unscrew the bolster sleeve nuts on the back of your satellite dish.
Expel your satellite dish and tenderly place it on the ground or other secure area.
Place your 7-inch attractive air pocket level on the pole to confirm that it is opposite (or 90 degrees) to the ground.
Re-level the pole as important to re-position it to be opposite to the ground.
Place your satellite dish painstakingly back onto the pole and re-fix the bolster sleeve nuts so that your satellite dish is secure, yet versatile.
When you have put your satellite dish back on the pole, you can change the azimuth.
Alter the azimuth of your satellite dish. The azimuth alludes to the revolution of the entire satellite dish around a vertical pivot (the pole). It is the flat (side-to-side) edge. To conform the azimuth of your satellite dish:
Utilize your compass to figure out which course is west.
Turn your satellite dish gradually from the west towards the east, while observing the show signal level on the sign meter of the Dish Pointing menu.
Turn your satellite dish towards the east once you see the show signal begin to increment. At the point when the show signal begins to diminish once more, pivot your satellite dish back towards the west until the sign meter has achieved the most elevated sign level.
Fix the bolster sleeve nuts totally and guarantee your satellite dish can no more move.
In the event that the show signal quality is still not to sought level, you can likewise alter the rise of your satellite dish. The height of your satellite dish ought to just need conformity if the rise jolts have come free.
The height jolts are on either side of the back of your satellite dish.
The height jolts are on either side of the back of your satellite dish.
Alter the rise of your satellite dish. The rise alludes to the edge between the satellite dish guiding heading, specifically towards the satellite, and the nearby even plane. It is the vertical (up-down) point. To alter the rise of your satellite dish:
Relax the height jolts on either side of the back of your satellite dish, while supporting your satellite dish, with the goal that it is still versatile.
Lift your satellite dish vertically, while observing the show signal on the sign meter on the Dish Pointing menu. On the off chance that the sign level begins to reduction, bring down your satellite dish until the sign meter has achieved the most astounding sign level.
Once the sign meter has achieved the most noteworthy sign quality, quit lifting your satellite dish.
Fix the rise jolts totally and guarantee your satellite dish can no more move.
When you have fixed the rises jolts, you can re-secure your satellite dish.
Re-Securing Your Satellite Dish
After you have balanced the azimuth and balanced the rise, affirm all bolster sleeve nuts and height fasteners are fixed. Affirm on the sign meter of the Dish Pointing menu that the show signal quality is at its most abnormal amount.
https://turbofuture.com/home-theater-audio/How-to-Re-Peak-a-DIRECTV-Satelite-Dish-for-Better-Signal
Online Port open verification
http://www.canyouseeme.org/
This is a free utility for remotely verifying if a port is open or closed. It is useful to users who wish to verify port forwarding and check to see if a server is running or a firewall or ISP is blocking certain ports.
This is a free utility for remotely verifying if a port is open or closed. It is useful to users who wish to verify port forwarding and check to see if a server is running or a firewall or ISP is blocking certain ports.
| Common Ports | |
|---|---|
| FTP | 21 |
| SSH | 22 |
| Telnet | 23 |
| SMTP | 25 |
| DNS | 53 |
| HTTP | 80 |
| POP3 | 110 |
| IMAP | 143 |
| Other Applications | |
| Remote Desktop | 3389 |
| PC Anywhere | 5631 |
Subscribe to:
Posts (Atom)