Monday, June 29, 2015

Jesus And The Virgin Mary In Islam


Wednesday, June 24, 2015

Neil Armstrong dies along with secrets of what he saw on moon

Neil Armstrong, the first man to walk on the moon died today from heart failure. For many, Armstrong is the all-American hero who performed the seemingly impossible. He fulfilled President Kennedy’s vision of putting a man on the moon before the end of the decade. Armstrong’s walk on the moon was televised and witnessed by hundreds of millions around the planet. For many it was an unforgettable experience and sparked hopes of a bright future for human space travel. What Armstrong experienced that day on the moon has been marked by controversy over a two minute period of radio silence that surprised viewers and fueled many theories over what really happened. According to alleged leaked government documents and photographs, Armstrong did not just see the barren landscape televised to millions, but something much more significant. According to NASA insiders and an alleged ham radio transmission intercept, what Armstrong witnessed that day changed his life, and led to the eventual abandonment of the manned lunar missions. According to alleged leaked documents, two huge extraterrestrial spacecraft watched the Apollo 11 landing, and observed the Armstrong and Buzz Aldrin moon walks.

During the Apollo 11 moon landing, there was a two minute period of radio silence. According to NASA, the problem arose from one of two television cameras overheating, thus disrupting the reception. What really happened, according to various sources, was that Armstrong and Aldrin saw something else watching them! According to Timothy Good, author of Above Top Secret (1988) HAM radio operators receiving the VHF signals transmitted from Apollo 11 to NASA’s Houston headquarters, intercepted the following message which NASA screened from the public in the missing two minutes:
Mission Control:
What's there ? Mission Control calling Apollo 11.
Apollo 11:
These babies are huge, sir … enormous….Oh, God, you wouldn't believe it! I'm telling you there are other space craft out there… lined up on the far side of the crater edge… they're on the moon watching us. (Above Top Secret, p. 384.)
The HAM operator’s radio intercept was widely dismissed by the media, but in 1975 it received unexpected support. Maurice Chatelain, is a retired NASA communications engineer who helped develop the communications system used in the Apollo moon missions. In his 1975 book, Our Cosmic Ancestors, he wrote:
[O]nly moments before Armstrong stepped down the ladder to set foot on the Moon, two UFOs hovered overhead. Edwin Aldrin took several pictures of them. Some of these photographs have been published in the June 1975 issue of Modern People magazine.” (p. 25)
Later, in 1979, Chatelain said that Armstrong’s sighting of two UFOs over a lunar crater was being deliberately kept from the media and public by NASA: “The encounter was common knowledge in NASA, but nobody has talked about it until now.” l Even more remarkably, Chatelain claimed that:
…all Apollo and Gemini flights were followed, both at a distance and sometimes also quite closely, by space vehicles of extraterrestrial origin – flying saucers, or UFOs, if you want to call them by that name. Every time it occurred, the astronauts informed Mission Control, who then ordered absolute silence.

Was the missing two minutes of radio silence during the Apollo 11 moon landing an attempt by NASA to cover up what Armstrong really saw on the moon? Were UFO sightings a common occurrence during Apollo missions?
According to Buzz Aldrin in a number of press interviews, Apollo 11 was indeed watched by a UFO during its journey to the moon. Aldrin describes how the Apollo 11 astronauts avoiding mentioning the word UFO in reporting what they were witnessing, and instead asked Houston about the location of the Saturn V launch rocket. Aldrin’s admission that Apollo 11 was being shadowed by a UFO does give credence to belief that UFOs did witness the moon landing, and Armstrong had reported this to NASA in a radio communication that resulted in the missing two minutes of radio silence. Aldrin’s admission also supports Chatelain’s claim that one or more extraterrestrial vehicles watched the Apollo 11 moon landing as Chatelain claimed in his book.
Is there any other source supporting the controversial claims that Neil Armstrong had witnessed two huge extraterrestrial vehicles over a lunar crater watching the Apollo 11 moon landing. According to Timothy Good, Dr Vladimir Azhazha, a physicist and Professor of Mathemeatics at Moscow University at the time:
Neil Armstrong relayed the message to Mission Control that two large, mysterious objects were watching them afte3r having landed near the moon module. But his message was never head by the public – because NASA censored it. (Above Top Secret, p. 384)
So why did NASA eventually terminate the Apollo missions if extraterrestrial visitors were there and watching the Earth? The answer according to Armstrong, as relayed by an unnamed Professor at a NASA symposium is as follows:
Professor: What really happened out there with Apollo 11?
Armstrong: It was incredible … of course, we had always known there was a possibility … the fact is, we were warned off. There was never any questions then of a space station or a moon city.
Professor: How do you mean “warned off”?
Armstrong: I can’t go into details, except to say that their ships were far superior to ours both in size and technology – Boy, where they big! … and menacing …. No, there is no question of a space station.
Professor: But NASA had other missions after Apollo 11?
Armstrong: Naturally – NASA was committed at that time, and couldn’t risk a panic on earth…. But it really was a quick scoop and back again. (Above Top Secret, p. 186)
So what’s the truth? Did Neil Armstrong really see extraterrestrial vehicles on the moon, who eventually warned NASA not to return? With Armstrong’s death we will perhaps never have his personal version of what really happened on that July day in 1969. Perhaps NASA will one day release an official version of what really happened, or have they already done so through a fictional movie admission by Buzz Aldrin? In the movie Transformers: Dark of the Moon, Buzz Aldrin comes forward to reveal a version of the truth about what he and Armstrong saw on the moon. In the movie he says on a secret black operations radio line to NASA, during public radio silence, while on the moon:
Buzz Aldrin: You cannot believe what we're seeing…
Black Ops NASA Technician: We are not alone after all, are we?
Buzz Aldrin: No, sir. We're not alone.
If the above events are true, it must have been very difficult for Armstrong to keep official silence about what he really saw on the moon for over four decades. Perhaps that explains his reclusive nature after the lunar missions, and public reticence in describing his personal experiences on the moon. If so, he remained true to his word and kept silence despite any personal reservations to the contrary. Neil Armstrong was an American Patriot to the end.
© Copyright 2012. Michael E. Salla. Exopolitics.org
Permission is granted to include extracts of this article on websites and email lists with a link to the original. This article is copyright © and should not be added in its entirety on other websites or email lists without author's permission.

retrieved from url
http://www.examiner.com/article/neil-armstrong-dies-along-with-secrets-of-what-he-saw-on-moon?cid=yahoo-recommends-inbound

Wednesday, June 17, 2015

How to setup most Wi-Fi routers: via the Web interface


from Mr 

1.    
Connect the router's WAN port to your Internet source, such as a DSL or cable modem, using the first network cable. All home routers have just one WAN port (sometimes labeled the Internet port); this port is always separate from the other network ports and often is a different color to further differentiate it. 
Note: If you do not have Internet access at home, or want to have an isolated (non Internet-enabled) network, you can skip this step. Later on you can always complete this step when the Internet is available or needed.
2.     Connect one of the router's LAN ports (most routers have four LAN ports) to the computer using the second network cable.
3.     Plug the router into the power outlet using its power adapter, as you would with most electronics. If the router has an on-off switch, make sure the router is on. Many routers don't have this switch and will turn on as you plug it in.(Dong Neo, CNET.com)
Most routers' Web interfaces come with similar items and are self-explanatory.



That's it -- you have just finished the hardware setup.
3. Accessing the Web interface
The next step is to use the Web browser to display the router's Web interface. Basically, you will need two things: the router's URL, which is always its default IP address, and default log-in information. You'll find this information in the router's manual, and sometimes it's printed on the underside of the router, as well.
Most, if not all home routers on the market have a default IP address in this format: 192.168.x.1, where, depending on the vendor, x tends to be 0, 1, 2, 3, 10, or 11. For example, routers from Trendnet almost always have a default address of 192.168.10.1, while D-Link routers use 192.168.0.1 or 192.168.1.1.
And the log-in information is also quite predictable. The username (if any) is almost always admin and the password (if any) tends to be one of these: adminpassworddefault, or 1234.
Once you have gotten these two pieces of information, just type the router's IP address in the address bar of a browser on a connected computer, press Enter, and then enter the log-in information, after which you'll be greeted with the Web interface.(Dong Neo, CNET.com)

A router's WAN (Internet) port is always clearly distinguished from the LAN (Ethernet) ports. Also note the reset button, which brings the router's settings to default value.



You can quickly find out the router's default address by using the ipconfig command on a Windows computer.Dong Ngo/CNET
Here's a handy chart of info for popular networking vendors that I put together. (Note that during the setup process you should change this information, at least the default password, to keep your network safe from intruders.)
 You can quickly find out the router's default address by using the ipconfig command on a Windows computer.


Vendor
Default IP
Default log-in (username/password)
2Wire (AT&T)
192.168.0.254
(blank)/(the device's serial number)
3Com
192.168.1.1
(blank)/admin or adminttd/adminttd
Amped Wireless
192.168.3.1
admin/admin
Asus
192.168.1.1
admin/admin
Belkin
192.168.2.1
(blank)/(blank) or admin/1234
Buffalo
192.168.11.1
root/(blank)
D-Link
192.168.0.1 or 192.168.1.1
admin/(blank)
Linksys
192.168.0.1 or 192.168.1.1
(blank)/root or admin/admin or (blank)/admin or Administrator/admin
Motorola
192.168.0.1
admin/motorola or admin/password
Netgear
192.168.0.1 or 192.168.1.1
admin/password or Admin/1234
Trendnet
192.168.10.1
admin/admin
ZyXel
192.168.1.1
admin/1234
Also, from a connected computer, you can always find out what the current IP address is of the local network's router. This is helpful if a router's default IP address has been changed. On a Windows computer do this:
1.     Run the command prompt (you can find it in the Start menu, or in Windows 8 just type cmd when you're at the Metro Start menu, then press Enter).
2.     At the Command Prompt window, type in ipconfig then press Enter. You will see a lot of things, but the IP address following the Default Gateway is the address of the router.


 On a Mac, it's also quite easy to find out the default IP of the local network's router.
On a Mac, it's also quite easy to find out the default IP of the local network's router.Dong Ngo/CNET
On a Mac: Head to System Preferences > Network > select the current connected connection (it's likely Ethernet) > click on Advanced > on the first tab, TCP/IP, the router's IP address is shown next to Router.
4. A new router's basic settings
Though the design of the Web interface is opened varies from one vendor to another, most of them have granular menus. Listed below are typical main menu items and what they do.
Wizard: This is where you can start a step-by step guided setup process. Many routers' interfaces show the wizard when the Web interface is accessed for the first time. You just have to go through and set up a few of the routers' settings, such as its log-in password (to be changed from the default -- you should definitely do this to keep your network secure) and the name and password for the Wi-Fi network (or networks, for dual-band routers). Some wizards also ask for your time zone, the current time and date, and so on. With most routers you can skip the wizard and set up the router manually, if you want to, or you can finish the wizard and get back to the interface to further customize the network.
 It's a good practice to save the router's current settings before making changes. This way you can always restore the previous settings if something goes wrong.


It's a good practice to save the router's current settings before making changes. This way you can always restore the previous settings if something goes wrong.Dong Ngo/CNET
Setup section
Wireless (or Wireless settings): Where you can customize the router's Wi-Fi network(s). You can pick the name of the network, change the password, turn the Wi-Fi Protected Setup feature on or off, and a lot more.
WAN (or Internet): Most of the time you should use the Auto setting for this section. However, some ISPs might require special settings; in those cases you can enter them here.
LAN (or Network settings): This is where you can change the local network settings, including the default IP address of the router itself. (Note that if you change the router's default IP address, which is recommended for security reason, you'll then need to use the new address to access the router's Web interface.) Here you can also change the range of IP addresses used for local clients, and add clients to the DHCP Reservation list. Once on this list, the clients' IP addresses will remain the same, which is required for some Internet applications. Most of the time, you don't need to change anything in this section at all.
Tools (or Administration) section
Admin password (or Password): Change the router's password. This is the password required when you log in the router's Web interface.
System: Where you can back up the current settings of the router to a file, or restore settings from a file; update the router's firmware; and so on. It's always helpful to back up the router's settings before you make changes.
You'll find a lot more settings and features on a router's Web interface, and when have time, you should try them out. If worst comes to worst, you can turn to the last-resort step below to restore the router to its default settings.
5. The last resort
All routers come with a reset button. This is a tiny recessed button that can be found on the bottom or side of the device. Using something pointy, such as an unfolded paper clip, to press and hold this button for about 10 seconds (when the router is plugged into power) will bring its settings back to the factory default. In other words, the router will be reset to the state it was in when you bought it. You can set it up again from the beginning, or you can log in to its Web interface and restore the router's settings from a backup file.
That's it for now. If you haven't found your questions answered, send them to me via FacebookTwitter, or Google+, or just post them in the comments section below.(Dong Neo, CNET.com)





CNET editor Dong Ngo has been involved with technology since 2000, starting with testing gadgets and writing code for CNET Labs' benchmarks. He now manages CNET San Francisco Labs, reviews 3D printers, networking/storage devices, and also writes about other topics from online security to new gadgets and how technology impacts the life of people around the world.See full bio


Retrieved from URL 
http://www.cnet.com/how-to/home-networking-explained-part-5-setting-up-a-home-router/


(Dong Neo, CNET.com)

Uri geller's technique revealed!


Stuff They Don't Want You to Know - Numerology


Monday, June 15, 2015

Install Kodi on the Amazon Fire Stick or Fire TV (no weird downloads)




Installing Android Studio

Visit the url 
http://developer.android.com/sdk/installing/index.html?pkg=studio

Android Studio provides everything you need to start developing apps for Android, including the Android Studio IDE and the Android SDK tools.
If you didn't download Android Studio, go download Android Studio now, or switch to the stand-alone SDK Tools installinstructions.
Before you set up Android Studio, be sure you have installed JDK 6 or higher (the JRE alone is not sufficient)—JDK 7 is required when developing for Android 5.0 and higher. To check if you have JDK installed (and which version), open a terminal and type javac -version. If the JDK is not available or the version is lower than 6, go download JDK.
To set up Android Studio on Windows:
  1. Launch the .exe file you just downloaded.
  2. Follow the setup wizard to install Android Studio and any necessary SDK tools.
    On some Windows systems, the launcher script does not find where Java is installed. If you encounter this problem, you need to set an environment variable indicating the correct location.
    Select Start menu > Computer > System Properties > Advanced System Properties. Then open Advanced tab > Environment Variables and add a new system variable JAVA_HOME that points to your JDK folder, for exampleC:\Program Files\Java\jdk1.7.0_21.
The individual tools and other SDK packages are saved outside the Android Studio application directory. If you need to access the tools directly, use a terminal to navigate to the location where they are installed. For example:
\Users\\sdk\
Android Studio is now ready and loaded with the Android developer tools, but there are still a couple packages you should add to make your Android SDK complete.